Motive power trade · Ontario · Trade code 310E
Alignment and Brakes Technician
You fix the parts that help a vehicle steer, stop and ride smoothly, like brakes, suspension, steering and tires, and line up the wheels.
What you'd do
- Inspect brakes, tires and suspension for wear
- Replace brake pads and worn parts
- Line up wheels using alignment equipment
- Mount, balance and swap tires
- Explain what needs fixing to customers
Who hires
Who it suits
Suits someone hands-on who likes cars, pays close attention to small measurements, and does not mind working on their feet in a busy shop.
The setting: Indoor shop work on vehicles raised on hoists, with precise measurements, heavy wheels, noise, and repeat jobs for customers.
Try it first, this month
Take an auto shop class at school, or ask a local alignment or tire shop if you can spend a day watching the technicians work.
Or watch it done: Ask a shop owner to walk you past the alignment bay and explain the readouts, without touching any equipment. Watch only: never do regulated or risky work to try a trade.
The official route
The Alignment and Brakes Technician apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 310E
- Classification
- Compulsory. You must be a registered apprentice or hold a certificate to work in this trade.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 480 hours, 2 levels
- On-the-job training
- 5,400 hours
- Total
- 5,880 hours (approximately three years, by Skilled Trades Ontario's estimate)
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 12)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Sources: Skilled Trades Ontario: Alignment and Brakes Technician and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Alignment and Brakes Technician apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$1,000
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
The amount is set by sector. We place this trade in motive power, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageOntario Apprenticeship Completion Bonus
$2,000
When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a labelled diagram of a car wheel showing toe, camber and caster, with a made-up sample alignment report beside it.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A licensed technician at an automotive shop, or your school's OYAP recruiter.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- What must a new hire hold before doing regulated brake or suspension work?
- Which tasks would I do first while I learn under supervision?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72410, Automotive service technicians, truck and bus mechanics and mechanical repairers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $18.75
- Median
- $30.00
- High
- $43.27
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Questions people ask
- Do you need a licence to work as a Alignment and Brakes Technician in Ontario?
- Yes. Alignment and Brakes Technician is a compulsory trade, so to work in it legally you must be a registered apprentice, or hold a Provisional Certificate of Qualification or a Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register.
- How long is the Alignment and Brakes Technician apprenticeship?
- 5,880 hours in total: 5,400 on the job and 480 in school, over 2 levels of in-school training. Skilled Trades Ontario puts that at approximately three years.
- Is Alignment and Brakes Technician a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What grants can a Alignment and Brakes Technician apprentice get in Ontario?
- Ontario's Tools Grant is 1,000 for motive power trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More motive power trades
Related trades
- Agricultural Equipment TechnicianYou find out what is wrong with tractors and farm machines, then fix them so farmers can keep working through planting and harvest.425A · Non-compulsory
- Automotive Electronic Accessory TechnicianYou install and fix electronic extras in vehicles, like stereos, alarms, cameras and other add-on gadgets, in cars and heavy trucks.310K · Compulsory
- Automotive Glass TechnicianYou replace and repair windshields and other glass in cars and trucks, getting drivers back on the road safely.274L · Non-compulsory
- Automotive Service TechnicianYou find and fix problems in cars and light trucks, from routine servicing to engine, brake and electrical repairs.310S · Compulsory
- Heavy Duty Equipment TechnicianYou diagnose and repair big machines like bulldozers, loaders and mining trucks, from engines and hydraulics to brakes and tires.421A · Non-compulsory
- Marine Engine TechnicianYou diagnose and fix boat engines and the systems around them, including electrical, steering and propulsion, for boats and other watercraft.435B · Non-compulsory
Not sure which trade fits?