Industrial trade · Ontario · Trade code 670D
Die Designer
You design the metal dies that cut and shape parts, like car panels or appliance pieces, turning a part drawing into a tool that can make thousands.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Read part drawings and work out how to make them
- Build tool designs on a CAD computer program
- Plan the order of cutting and forming steps
- Choose the right type of die for each job
- Create drawings the toolroom uses to build the die
Who hires
Who it suits
Suits someone who likes computers, drawing and puzzles, and enjoys figuring out how things fit together with exact precision.
The setting: Mostly indoor computer work on die layouts, with close measurement and drawings, plus visits to the shop floor to see tools.
Try it first, this month
Take a tech design or drafting class at school and try a free CAD program at home to model a simple part.
Or watch it done: Watch a free online CAD introduction and look at a die sample at a school or trade show. Watch only: never do regulated or risky work to try a trade.
The official route
The Die Designer apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 670D
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- C of Q in related trade
- In-school training
- 240 hours, 1 level
- On-the-job training
- 4,000 hours
- Total
- 4,240 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Die Designer and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a simple fictional cutting die in CAD, with a parts list and sample tolerances.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A tooling design firm, or a college tool and die program coordinator.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which active design or tooling credentials now take the place of this program?
- Could I see how a die I draw would be built?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Die Designer in Ontario?
- No. Die Designer is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Die Designer apprenticeship?
- 4,240 hours in total: 4,000 on the job and 240 in school, over 1 level of in-school training.
- Is Die Designer a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is C of Q in related trade. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
- Entertainment Industry Power TechnicianYou plan and set up the temporary electrical power that film sets, concerts and festivals need to run lights, sound and cameras.269E · Non-compulsory
Not sure which trade fits?