Launch League

Industrial trade · Ontario · Trade code 636E

Elevating Devices Mechanic

You install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.

What you'd do

  • Read drawings to plan an elevator installation
  • Hoist and fasten rails, cars and cables in shafts
  • Wire and test motors and control systems
  • Inspect and service existing elevators
  • Find and fix faults when a lift stops

Who hires

Elevator contractorsBuilding service firms

Who it suits

Suits someone who likes mechanical and electrical work, doesn't mind heights and tight spaces, and takes safety seriously.

The setting: Machine rooms, shafts and building sites with rigging, heights, tight spaces, strict safety rules and mechanical and electrical work.

Try it first, this month

Take a tech class at school and ask a guidance counsellor about OYAP, or ask a local elevator company about an information session.

Or watch it done: Ask a building manager about a tour of an elevator machine room led by a mechanic, outside the shaft. Watch only: never do regulated or risky work to try a trade.

The official route

The Elevating Devices Mechanic apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
636E
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes, offered by TSSA.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
720 hours, 1 level
On-the-job training
7,280 hours
Total
8,000 hours (approximately four years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Mechanical print readingLadders, scaffolding and riggingMechanical practiceElevator installationHydraulic systemsIndustrial electricity and controls

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Elevating Devices Mechanic and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Elevating Devices Mechanic apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Mechanical systems basicsControl circuit basicsSafety interlock ideasReading drawings

Make something to show

Draw a simple diagram showing how a fictional elevator's doors, brakes and controls work together to stay safe.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

An elevator service company, or your school's OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Senior elevator mechanicField supervisorModernization specialist

Ask an employer

Before you sign on, or on a job shadow day.

  • What approvals and specialist training are needed beyond the apprenticeship?
  • What fall protection training comes before I enter a shaft?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72406, Elevator constructors and mechanics, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$20.00
Median
$43.50
High
$68.00

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Elevating Devices Mechanic in Ontario?
No. Elevating Devices Mechanic is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Elevating Devices Mechanic apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 1 level of in-school training. Skilled Trades Ontario puts that at approximately four years.
Is Elevating Devices Mechanic a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Elevating Devices Mechanic apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.