Launch League

Industrial trade · Ontario · Trade code 277Z

Hydraulic/Pneumatic Mechanic

You build, fix and tune machines that move power with liquid or compressed air, such as presses, lifts and factory equipment.

What you'd do

  • Take apart hydraulic and air systems to find leaks and faults
  • Replace worn seals, hoses, valves and cylinders
  • Read drawings to check that parts match the plan
  • Sketch changes and write up technical notes
  • Test repaired systems to confirm they work as they should

Who hires

Industrial maintenanceEquipment repairFluid-power suppliers

Who it suits

Suits someone who likes figuring out why a machine is not working, enjoys using tools and diagrams, and does not mind getting hands dirty.

The setting: Mostly indoor shop and plant work on pressurized fluid systems, with drawings and records, tools, lifting heavy parts and strict machine shutdown routines.

Try it first, this month

Take a tech or auto shop class, or ask a local equipment repair shop for a job shadow day to watch a technician trace a hydraulic problem.

Or watch it done: Tour a college hydraulics lab where instructors show fluid power training equipment and circuit diagrams. Watch only: never do regulated or risky work to try a trade.

The official route

The Hydraulic/Pneumatic Mechanic apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
277Z
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
No. You finish with a Certificate of Apprenticeship.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
600 hours, 1 level
On-the-job training
7,400 hours
Total
8,000 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels to earn a Certificate of Apprenticeship.

Sources: Skilled Trades Ontario: Hydraulic/Pneumatic Mechanic and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Hydraulic/Pneumatic Mechanic apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading fluid power schematicsValve and cylinder basicsPressure and flow conceptsTechnical sketchingRecord keeping

Make something to show

Label a public hydraulic or pneumatic schematic, then write a short fault-finding flow chart for a fictional machine that is slow to move.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

An experienced hydraulic repair shop, an industrial maintenance supervisor, or a college program coordinator.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Fluid power specialistMaintenance supervisorService technician leadHydraulic systems designer

Ask an employer

Before you sign on, or on a job shadow day.

  • What safety training do I get before working on pressurized systems?
  • How much of the work is repair in the shop versus calls to customer sites?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Hydraulic/Pneumatic Mechanic in Ontario?
No. Hydraulic/Pneumatic Mechanic is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
How long is the Hydraulic/Pneumatic Mechanic apprenticeship?
8,000 hours in total: 7,400 on the job and 600 in school, over 1 level of in-school training.
Is Hydraulic/Pneumatic Mechanic a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Hydraulic/Pneumatic Mechanic apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.