Industrial trade · Ontario · Trade code 614B
Draftsperson Plastic Mould Design
You design the moulds that shape plastic into things like bottles, toys and car parts, using computer drawing programs.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Model plastic parts and their moulds in CAD
- Plan how molten plastic will flow into a mould
- Draw each mould piece with exact sizes
- Prepare drawing sets for the people who build moulds
- Change designs when a test part comes out wrong
Who hires
Who it suits
Suits someone who likes drawing and computers, enjoys three-dimensional puzzles, and cares about getting small details exactly right.
The setting: Mostly indoor computer work on mould drawings with complex surfaces, close tolerances and review of finished moulds.
Try it first, this month
Take a tech design class, try a free CAD program at home, and look at everyday plastic items to spot the mould lines.
Or watch it done: Look at everyday plastic parts and ask a mould maker how a drawing becomes a finished mould. Watch only: never do regulated or risky work to try a trade.
The official route
The Draftsperson Plastic Mould Design apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 614B
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 600 hours, 1 level
- On-the-job training
- 7,400 hours
- Total
- 8,000 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Draftsperson Plastic Mould Design and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a fictional two-part mould for a simple plastic item, labelling where the two halves meet.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A mould design manager, or a college drafting program coordinator.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which current plastics or tooling programs lead to an equivalent job?
- Would I get to see moulds being built and tested?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Draftsperson Plastic Mould Design in Ontario?
- No. Draftsperson Plastic Mould Design is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Draftsperson Plastic Mould Design apprenticeship?
- 8,000 hours in total: 7,400 on the job and 600 in school, over 1 level of in-school training.
- Is Draftsperson Plastic Mould Design a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Mould MakerYou design, build and repair the moulds used to mass produce plastic and metal parts, working to very exact measurements.431A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?