Launch League

Industrial trade · Ontario · Trade code 447A

Instrumentation and Control Technician

You install, tune and fix the sensors, controls and computer systems that keep factories and plants running safely and accurately.

What you'd do

  • Install and set up sensors and control systems
  • Calibrate instruments so their readings are correct
  • Test control systems to find why a process has gone off track
  • Read drawings and wiring diagrams
  • Write up reports on repairs and changes

Who hires

Chemical plantsManufacturingUtilities

Who it suits

Suits someone who likes electronics, computers and puzzles, is precise and patient, and enjoys testing and adjusting until things work exactly right.

The setting: Indoor plants and industrial sites with some outdoor and cramped spaces, working on sensors and controls, using test tools, and following safety procedures around live processes.

Try it first, this month

Take an electronics or tech class, try a beginner microcontroller kit at home, and ask your guidance counsellor about a co-op placement.

Or watch it done: Visit a college instrumentation lab to see a control system training rig and how instruments are calibrated. Watch only: never do regulated or risky work to try a trade.

The official route

The Instrumentation and Control Technician apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
447A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 12
In-school training
720 hours, 3 levels
On-the-job training
7,280 hours
Total
8,000 hours (approximately four years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Trade practices and codesElectrical theory and calculationsElectronic systems and documentationProcess control basicsComputer control systemsSafety and environmental protection

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Instrumentation and Control Technician and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Instrumentation and Control Technician apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Sensors and measurementCalibration basicsControl loop conceptsReading instrument diagrams

Make something to show

Create a chart showing how a fictional heating process would be controlled, plus a sample calibration record sheet with made-up readings.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A plant automation or instrumentation supervisor, or a college program coordinator in instrumentation or automation.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Controls specialistAutomation supervisorField service technicianProcess control designer

Ask an employer

Before you sign on, or on a job shadow day.

  • Which control systems will I work with, and what electrical skills should I bring?
  • How much work is at plants versus in a shop?

What it pays in Ontario

Job Bank's Ontario figures for NOC 22312, Industrial instrument technicians and mechanics, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$35.00
Median
$44.00
High
$56.00

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Very limited" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Instrumentation and Control Technician in Ontario?
No. Instrumentation and Control Technician is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Instrumentation and Control Technician apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately four years.
Is Instrumentation and Control Technician a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Instrumentation and Control Technician apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.