Industrial trade · Ontario · Trade code 277M
Mould or Die Finisher
You shape, smooth and polish moulds and metal-working dies by hand and with power tools until their surfaces are exactly right.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Grind and file mould or die surfaces smooth
- Polish metal surfaces to a fine finish
- Use power and hand tools to shape fine details
- Check surfaces against drawings
- Fix small flaws and worn spots
Who hires
Who it suits
Suits someone who enjoys careful handwork, has patience for slow detailed finishing, and likes working with metal and tools in a shop.
The setting: Indoor shop work at a bench, using hand and power tools to smooth and polish moulds and dies, with close attention to surface quality.
Try it first, this month
Try polishing and finishing a small wood or metal craft project at home, or take a manufacturing tech class.
Or watch it done: Visit a college manufacturing program or tooling show to see a polished mould and talk with a finisher. Watch only: never do regulated or risky work to try a trade.
The official route
The Mould or Die Finisher apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 277M
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 240 hours, 1 level
- On-the-job training
- 3,760 hours
- Total
- 4,000 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Mould or Die Finisher and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Create a before and after surface inspection checklist for a fictional die, with sample measurements and notes on what counts as acceptable.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A tool and die shop supervisor, or a college program coordinator who can point to related machining routes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Since this trade is closed to new apprentices, which program should I choose instead?
- How do you train new people to polish and inspect surfaces?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Mould or Die Finisher in Ontario?
- No. Mould or Die Finisher is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Mould or Die Finisher apprenticeship?
- 4,000 hours in total: 3,760 on the job and 240 in school, over 1 level of in-school training.
- Is Mould or Die Finisher a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Mould MakerYou design, build and repair the moulds used to mass produce plastic and metal parts, working to very exact measurements.431A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?