Launch League

Industrial trade · Ontario · Trade code 456P

Pressure Systems Welder

Pressure Systems Welders join metal plates and tubes to build and repair boilers and other tanks that hold pressure. Every weld has to hold up to strict testing.

What you'd do

  • Read drawings and weld symbols
  • Prepare and fit metal pieces before welding
  • Weld plates, tubes and shells together
  • Repair damaged boilers and pressure vessels
  • Check welds so they pass pressure tests

Who hires

Industrial constructionPiping shopsPower and process plants

Who it suits

Suits someone who likes detailed, careful work with a steady hand and is comfortable with heat, noise and safety gear.

The setting: Indoor shop and plant work welding boilers and pressure vessels, with heat, sparks, awkward positions, strict testing and records that must be exact.

Try it first, this month

Take a welding or manufacturing tech class, or ask a local fabrication shop about a job shadow day. Ask your guidance counsellor about co-op placements in welding.

Or watch it done: Visit a college welding lab open house to see test samples cut open and inspected with an instructor. Watch only: never do regulated or risky work to try a trade.

The official route

The Pressure Systems Welder apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
456P
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
480 hours, 2 levels
On-the-job training
5,280 hours
Total
5,760 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Pressure Systems Welder and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Pressure Systems Welder apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Welding termsMetal propertiesPressure code awarenessReading weld symbolsQuality inspection basics

Make something to show

Annotate a sample weld symbol drawing for a fictional pressure pipe and write an inspection checklist, as a paper exercise only.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A boiler or pressure vessel fabricator, a union local for the trade, or a college welding program coordinator.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Specialty pressure welderWelding inspectorIndustrial supervisorWelding instructor

Ask an employer

Before you sign on, or on a job shadow day.

  • What tests must I pass before welding on pressure equipment?
  • How are welds inspected and documented in your shop?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72106, Welders and related machine operators, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$21.00
Median
$28.00
High
$41.28

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Very limited" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Pressure Systems Welder in Ontario?
No. Pressure Systems Welder is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Pressure Systems Welder apprenticeship?
5,760 hours in total: 5,280 on the job and 480 in school, over 2 levels of in-school training.
Is Pressure Systems Welder a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Pressure Systems Welder apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.