Launch League

Industrial trade · Ontario · Trade code 246F

Process Operator Refinery, Chemical and Liquid Processes

Process Operators in refineries and chemical plants run the equipment that turns raw materials into finished products. You work from a control room and also check equipment around the site.

What you'd do

  • Run control panels and computer screens
  • Start up and shut down process units
  • Walk the site to check pumps and tanks
  • Respond to alarms and troubleshoot faults
  • Record readings and pass on notes to the next shift

Who hires

Chemical plantsRefineriesIndustrial processors

Who it suits

Suits someone who likes science, stays calm and alert, and is comfortable following strict safety procedures on large industrial sites.

The setting: Indoor control rooms and outdoor process units in plants, monitoring equipment around hazardous materials, with rotating shifts and emergency response duties.

Try it first, this month

Take chemistry and technology classes at school, and ask your guidance counsellor about plant tours, co-op or OYAP. A job shadow in a control room is a great way to test it.

Or watch it done: Watch a college process simulator demonstration or attend an open house at a process plant. Watch only: never do regulated or risky work to try a trade.

The official route

The Process Operator Refinery, Chemical and Liquid Processes apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
246F
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
No. You finish with a Certificate of Apprenticeship.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
720 hours, 1 level
On-the-job training
6,480 hours
Total
7,200 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels to earn a Certificate of Apprenticeship.

Sources: Skilled Trades Ontario: Process Operator Refinery, Chemical and Liquid Processes and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Process Operator Refinery, Chemical and Liquid Processes apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Chemistry basicsReading process diagramsGauges and alarmsLockout awareness

Make something to show

Annotate a fictional process diagram with alarm points and a plain-language note on what an operator would do at each alarm.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A process plant training lead, or a college program coordinator in chemical or process operations.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Senior operatorProcess safety specialistOperations managerShift supervisor

Ask an employer

Before you sign on, or on a job shadow day.

  • What emergency response and hazardous materials training do you provide?
  • How do shifts rotate, and how are new operators coached?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Process Operator Refinery, Chemical and Liquid Processes in Ontario?
No. Process Operator Refinery, Chemical and Liquid Processes is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
How long is the Process Operator Refinery, Chemical and Liquid Processes apprenticeship?
7,200 hours in total: 6,480 on the job and 720 in school, over 1 level of in-school training.
Is Process Operator Refinery, Chemical and Liquid Processes a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Process Operator Refinery, Chemical and Liquid Processes apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.