Industrial trade · Ontario · Trade code 246W
Process Operator Wood Products
Process Operators in wood products run the machines that turn logs and lumber into finished products. You watch the equipment, make adjustments and keep it running smoothly.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Operate sawing and processing machines
- Watch controls for jams and faults
- Adjust settings for different types of wood
- Clear blockages and do routine maintenance
- Check the finished products for quality
Who hires
Who it suits
Suits someone who likes working with machines in a mill setting, pays attention to sound and detail, and is comfortable in noisy, dusty places.
The setting: Indoor wood processing plant with noise, dust and large machines, monitoring and adjusting equipment, and shift work around guarded machinery.
Try it first, this month
Take a woodworking or manufacturing tech class, and ask a local sawmill or wood products plant about a tour or job shadow day.
Or watch it done: Visit a sawmill or wood products plant open house and watch operators from a marked viewing area. Watch only: never do regulated or risky work to try a trade.
The official route
The Process Operator Wood Products apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 246W
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 720 hours, 3 levels
- On-the-job training
- 6,000 hours
- Total
- 6,720 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Process Operator Wood Products and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Build a flow chart for a fictional lumber mill with a table of hazards and the controls for each stage.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A wood products plant supervisor, or a college program coordinator who can point to related manufacturing routes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Since this trade is closed to new apprentices, which training do you hire from?
- How do you control dust and noise for operators?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Process Operator Wood Products in Ontario?
- No. Process Operator Wood Products is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Process Operator Wood Products apprenticeship?
- 6,720 hours in total: 6,000 on the job and 720 in school, over 3 levels of in-school training.
- Is Process Operator Wood Products a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Process Operator Food ManufacturingProcess Operators in food manufacturing run the machines that cook, mix, package and move food products. You watch gauges and adjust settings so everything comes out right.246T · Non-compulsory
- Process Operator PowerProcess Operators in power plants run the systems that make electricity. You watch control panels, start up and shut down equipment, and head off problems before they grow.246R · Non-compulsory
- Process Operator Refinery, Chemical and Liquid ProcessesProcess Operators in refineries and chemical plants run the equipment that turns raw materials into finished products. You work from a control room and also check equipment around the site.246F · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
Not sure which trade fits?