Launch League

Motive power trade · Ontario · Trade code 310Q

Auto Body Repairer

You fix the bodies of cars, trucks and trailers, pulling out dents, reshaping panels and welding breaks, then prepare them for paint.

What you'd do

  • Pull out and reshape dented panels
  • Weld cracks and breaks in metal
  • Fit new panels and body parts
  • Fill and sand surfaces smooth
  • Mask and prep the vehicle for paint

Who hires

Auto body and collision repair businesses

Who it suits

Suits someone who works well with their hands, likes seeing a damaged thing made whole again, and does not mind dust, noise and tools.

The setting: Indoor shop with panel straightening, welding, sanding, noise and dust, repeated physical effort and careful finishing.

Try it first, this month

Take an auto body or shop class at school, or ask a local body shop about a job shadow day.

Or watch it done: Visit a car show or restoration display and ask exhibitors how panels were repaired and refinished. Watch only: never do regulated or risky work to try a trade.

The official route

The Auto Body Repairer apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
310Q
Classification
Compulsory. You must be a registered apprentice or hold a certificate to work in this trade.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 10
In-school training
480 hours, 2 levels
On-the-job training
5,520 hours
Total
6,000 hours (approximately three years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Work practicesWeldingBody repairRefinishingMechanical basicsPlastic and panel repair

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Auto Body Repairer and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Auto Body Repairer apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$1,000

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in motive power, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Vehicle body panelsSurface prep stepsCorrosion basicsRepair sequencing

Make something to show

Draw a process map for repairing a fictional dented door panel, with an inspection point at each stage.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A collision shop manager or body repairer, or a college auto body program coordinator.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Collision specialistQuality control leadRefinishing pathShop foreperson

Ask an employer

Before you sign on, or on a job shadow day.

  • What credentials and supervision do beginners need before doing repair work?
  • Which tasks would I start with, and who checks my work?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72411, Auto body collision, refinishing and glass technicians and damage repair estimators, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$18.00
Median
$29.00
High
$43.27

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Auto Body Repairer in Ontario?
Yes. Auto Body Repairer is a compulsory trade, so to work in it legally you must be a registered apprentice, or hold a Provisional Certificate of Qualification or a Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register.
How long is the Auto Body Repairer apprenticeship?
6,000 hours in total: 5,520 on the job and 480 in school, over 2 levels of in-school training. Skilled Trades Ontario puts that at approximately three years.
Is Auto Body Repairer a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Auto Body Repairer apprentice get in Ontario?
Ontario's Tools Grant is 1,000 for motive power trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.