Industrial trade · Ontario · Trade code 670C
Computer Numerical Control (CNC) Programmer
You write the instructions that tell computer-controlled machines how to cut metal into exact parts.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Read drawings to plan how a part will be made
- Choose cutting tools and machine steps
- Write and test programs for CNC machines
- Check the tool path on screen before cutting
- Write job notes so operators can run the part
Who hires
Who it suits
Suits someone who likes computers and machines, enjoys logic and puzzles, and has the patience to get exact details right.
The setting: Mostly indoor computer work reading drawings and planning machine paths, with some time near machines on the shop floor.
Try it first, this month
Try a free beginner CAD program like Tinkercad at home, or take a computer, manufacturing or tech class that uses design software.
Or watch it done: Watch a free online introduction to machine toolpaths and then ask a local shop what a programmer does. Watch only: never do regulated or risky work to try a trade.
The official route
The Computer Numerical Control (CNC) Programmer apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 670C
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- C of Q in related trade
- In-school training
- 240 hours, 1 level
- On-the-job training
- 4,000 hours
- Total
- 4,240 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Computer Numerical Control (CNC) Programmer and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Using free software, draw a fictional part and plan the order of cuts on paper, without running any machine.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A programmer or instructor at a CNC machine shop, or a college machining program coordinator.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which active machining credential and software skills would you value instead?
- Would I get time on the shop floor to see programs run?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Computer Numerical Control (CNC) Programmer in Ontario?
- No. Computer Numerical Control (CNC) Programmer is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Computer Numerical Control (CNC) Programmer apprenticeship?
- 4,240 hours in total: 4,000 on the job and 240 in school, over 1 level of in-school training.
- Is Computer Numerical Control (CNC) Programmer a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is C of Q in related trade. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Instrumentation and Control TechnicianYou install, tune and fix the sensors, controls and computer systems that keep factories and plants running safely and accurately.447A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?