Launch League

Construction trade · Ontario · Trade code 637C

Concrete Pump Operator

You run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.

What you'd do

  • Set up the pump and boom at the building site
  • Hook up pipes and hoses to carry the concrete
  • Control the boom while concrete flows into forms
  • Check the machine for leaks and wear before starting
  • Wash out the pump and hoses when the pour ends

Who hires

Concrete pumping contractorsCommercial and infrastructure sites

Who it suits

Suits someone who likes working outdoors with big machines, can stay focused on a moving job, and does not mind early starts and mess.

The setting: Outdoor construction sites with early starts, heavy equipment, high pressure lines, noise, weather and strict exclusion zones.

Try it first, this month

Ask a local concrete or building contractor if you can watch a pour from a safe distance with a supervisor, or take a construction technology class at school.

Or watch it done: Watch a pour from a marked safe viewing area while the crew explains where people must not stand. Watch only: never do regulated or risky work to try a trade.

The official route

The Concrete Pump Operator apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
637C
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
159 hours, 1 level
On-the-job training
2,000 hours
Total
2,159 hours (approximately one and a half years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Workplace communicationDriving and operating the vehiclePump and boom setupRunning the pumpCleaning and maintenanceLoading and unloading equipment

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Concrete Pump Operator and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Concrete Pump Operator apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Concrete basicsHand signalsPump systems conceptsSite logistics

Make something to show

Draw a fictional site plan showing a concrete delivery route, pump position and a marked safety zone.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A concrete pumping contractor, or a union local for the trade.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Lead pump operatorFleet coordinatorConcrete placement business

Ask an employer

Before you sign on, or on a job shadow day.

  • What licences, site permissions and pressure line training are required?
  • What hours do crews usually start, and how far do we travel?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Concrete Pump Operator in Ontario?
No. Concrete Pump Operator is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Concrete Pump Operator apprenticeship?
2,159 hours in total: 2,000 on the job and 159 in school, over 1 level of in-school training. Skilled Trades Ontario puts that at approximately one and a half years.
Is Concrete Pump Operator a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Concrete Pump Operator apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.