Construction trade · Ontario · Trade code 339C
Hoisting Engineer Mobile Crane Operator 2
You run a mobile crane that rolls on a truck or tracks, lifting and placing heavy building materials and equipment on construction and industrial sites.
What you'd do
- Inspect the crane and its controls before the first lift
- Plan each lift around the load, ground and weather
- Set up the crane on firm, level ground
- Follow hand signals from a ground crew while lifting
- Lubricate, service and repair parts of the machine
Who hires
Also searched as: Crane operator.
Who it suits
Suits someone who stays calm and focused, likes working outdoors on busy sites, has steady hands and good judgment, and takes safety rules seriously.
The setting: Outdoor construction and industrial sites in all weather, with a heavy machine, careful lift planning, rigging and setup, and responsibility for the safety of everyone nearby.
Try it first, this month
Ask your school guidance counsellor about a co-op or OYAP placement in construction, and take a construction technology class to get used to reading plans and thinking about loads.
Or watch it done: Watch a crane lift from a safe public spot, or attend a college open house where operators demonstrate a crane simulator. Watch only: never do regulated or risky work to try a trade.
The official route
The Hoisting Engineer Mobile Crane Operator 2 apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 339C
- Classification
- Compulsory. You must be a registered apprentice or hold a certificate to work in this trade.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- No
- Minimum education
- Grade 10
- In-school training
- 240 hours, 1 level
- On-the-job training
- 760 hours
- Total
- 1,000 hours (approximately one year, by Skilled Trades Ontario's estimate)
- Hours or competency
- Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 10)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: Hoisting Engineer Mobile Crane Operator 2 and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Hoisting Engineer Mobile Crane Operator 2 apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageOntario Apprenticeship Completion Bonus
$2,000
When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Work through a sample lift plan from a public training diagram, calculating a fictional load weight and checking it against a sample crane capacity chart.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A mobile crane employer or a hoisting training centre that can explain how operators move up through crane classes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which crane sizes will I be trained on, and how soon can I operate one?
- How are lifts planned and checked on your sites before I take a turn?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72500, Crane operators, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $24.50
- Median
- $40.48
- High
- $53.94
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Want the longer version, with a day in the job and who hates it? Read our full career guide.
Questions people ask
- Do you need a licence to work as a Hoisting Engineer Mobile Crane Operator 2 in Ontario?
- Yes. Hoisting Engineer Mobile Crane Operator 2 is a compulsory trade, so to work in it legally you must be a registered apprentice, or hold a Provisional Certificate of Qualification or a Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register.
- How long is the Hoisting Engineer Mobile Crane Operator 2 apprenticeship?
- 1,000 hours in total: 760 on the job and 240 in school, over 1 level of in-school training. Skilled Trades Ontario puts that at approximately one year.
- Is Hoisting Engineer Mobile Crane Operator 2 a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What grants can a Hoisting Engineer Mobile Crane Operator 2 apprentice get in Ontario?
- Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Hoisting Engineer Mobile Crane Operator 1You operate large mobile cranes that lift heavy steel, concrete and machinery into place on construction sites.339A · Compulsory
- Hoisting Engineer Tower Crane OperatorYou operate a tower crane, the tall crane that lifts materials high above a building site, working from a cab high up with radio contact to the crew below.339B · Compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Heavy Equipment Operator DozerYou operate a bulldozer to push, grade and level soil and rock on construction, mining and forestry sites.636C · Non-compulsory
- Heavy Equipment Operator ExcavatorYou operate an excavator to dig trenches, foundations and ditches and to move earth on construction, mining and road jobs.636B · Non-compulsory
- Heavy Equipment Operator Tractor Loader BackhoeYou operate a tractor loader backhoe, a machine that digs in back and scoops in front, on construction and utility jobs.636A · Non-compulsory
Not sure which trade fits?