Construction trade · Ontario · Trade code 339B
Hoisting Engineer Tower Crane Operator
You operate a tower crane, the tall crane that lifts materials high above a building site, working from a cab high up with radio contact to the crew below.
What you'd do
- Check the crane, cables and safety devices before starting
- Plan lifts and find the safest path for each load
- Move steel, concrete and equipment to exactly where it is needed
- Talk with the ground crew by radio throughout the lift
- Help with servicing the crane and its wire ropes
Who hires
Also searched as: Crane operator.
Who it suits
Suits someone who is comfortable with heights, patient, alert for long stretches, and good at staying calm while many people depend on their accuracy.
The setting: Outdoor work at height on construction and industrial sites, often alone in a cab for long stretches, in all weather, with lift planning and cable and rigging checks.
Try it first, this month
Take a construction or technological design class, and ask your guidance counsellor about a job shadow or OYAP link with a construction company, to see a site from the ground first.
Or watch it done: Ask a training centre whether visitors can watch a tower crane simulator session or see a crane from the ground with a guide. Watch only: never do regulated or risky work to try a trade.
The official route
The Hoisting Engineer Tower Crane Operator apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 339B
- Classification
- Compulsory. You must be a registered apprentice or hold a certificate to work in this trade.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- Yes
- Minimum education
- Grade 10
- In-school training
- 360 hours, 3 levels
- On-the-job training
- 2,640 hours
- Total
- 3,000 hours (approximately one and a half years, by Skilled Trades Ontario's estimate)
- Hours or competency
- Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 10)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: Hoisting Engineer Tower Crane Operator and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Hoisting Engineer Tower Crane Operator apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageCanada Apprentice Loan
Up to $4,000, interest-free
For your technical training in a Red Seal trade. A loan, so it is repaid.
Official pageRed Seal Completion Bonus
$5,000
Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Mark up a fictional construction site plan showing where a tower crane could stand, what it could reach and where loads would be picked and set.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A crane contractor working on large construction sites, or a hoisting trades training centre.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- How do you support operators who work alone at height for long shifts?
- What training do apprentices get on jacking, rigging and signals before climbing?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72500, Crane operators, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $24.50
- Median
- $40.48
- High
- $53.94
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Want the longer version, with a day in the job and who hates it? Read our full career guide.
Questions people ask
- Do you need a licence to work as a Hoisting Engineer Tower Crane Operator in Ontario?
- Yes. Hoisting Engineer Tower Crane Operator is a compulsory trade, so to work in it legally you must be a registered apprentice, or hold a Provisional Certificate of Qualification or a Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register.
- How long is the Hoisting Engineer Tower Crane Operator apprenticeship?
- 3,000 hours in total: 2,640 on the job and 360 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately one and a half years.
- Is Hoisting Engineer Tower Crane Operator a Red Seal trade?
- Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
- What grants can a Hoisting Engineer Tower Crane Operator apprentice get in Ontario?
- Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Hoisting Engineer Mobile Crane Operator 1You operate large mobile cranes that lift heavy steel, concrete and machinery into place on construction sites.339A · Compulsory
- Hoisting Engineer Mobile Crane Operator 2You run a mobile crane that rolls on a truck or tracks, lifting and placing heavy building materials and equipment on construction and industrial sites.339C · Compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Heavy Equipment Operator DozerYou operate a bulldozer to push, grade and level soil and rock on construction, mining and forestry sites.636C · Non-compulsory
- Heavy Equipment Operator ExcavatorYou operate an excavator to dig trenches, foundations and ditches and to move earth on construction, mining and road jobs.636B · Non-compulsory
- Heavy Equipment Operator Tractor Loader BackhoeYou operate a tractor loader backhoe, a machine that digs in back and scoops in front, on construction and utility jobs.636A · Non-compulsory
Not sure which trade fits?