Launch League

Construction trade · Ontario · Trade code 426A

Construction Millwright

You install, line up and fasten down machinery, from factory equipment to automated robot systems, so it runs smoothly.

What you'd do

  • Read drawings to plan where machines will sit
  • Unpack and move heavy equipment into position
  • Level and line up machines with precision tools
  • Weld and fabricate brackets and supports
  • Connect drives, motors and control parts

Who hires

Industrial construction and machinery installation contractors

Who it suits

Suits someone who likes mechanical puzzles, careful measuring, working with big equipment, and teaming up with other trades.

The setting: Building sites and plants installing heavy machinery, with rigging, precise alignment, noise and cooperation with many other trades.

Try it first, this month

Take a tech or manufacturing class at school, or ask a local plant or machine shop for a job shadow to see equipment being installed.

Or watch it done: Join a plant or shop tour where an installation team explains how machines are aligned and checked. Watch only: never do regulated or risky work to try a trade.

The official route

The Construction Millwright apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
426A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 10
In-school training
720 hours, 3 levels
On-the-job training
7,280 hours
Total
8,000 hours (approximately four and a half years, by Skilled Trades Ontario's estimate)
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

What school covers

Workshop practiceMachine technologyRigging and hoistingWelding and fabricationElectrical and electronic controlsDrawings and schematics

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Construction Millwright and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Construction Millwright apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Mechanical drawingsRigging conceptsMachine alignment ideasMeasuring accurately

Make something to show

Write a fictional equipment install checklist covering lifting steps and alignment checks, based on public guides.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A construction millwright contractor, or a union local for the trade.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Installation leadProject superintendentIndustrial maintenance path

Ask an employer

Before you sign on, or on a job shadow day.

  • How much of the work is site installation versus long-term plant maintenance?
  • What rigging and lifting training will I get first?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72400, Construction millwrights and industrial mechanics, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$23.00
Median
$35.59
High
$48.50

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Construction Millwright in Ontario?
No. Construction Millwright is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Construction Millwright apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately four and a half years.
Is Construction Millwright a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Construction Millwright apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.