Launch League

Construction trade · Ontario · Trade code 424A

Architectural Glass and Metal Technician

You cut, fit and install glass, windows, storefronts and metal frames on buildings, and fix them when they are cracked or damaged.

What you'd do

  • Measure openings and cut glass to size
  • Build aluminium frames for windows and storefronts
  • Install glass panels and seal them in place
  • Fit doors, hardware and skylights
  • Replace broken glass at homes and shops

Who hires

Glazing contractorsCommercial construction sitesGlass fabricators

Who it suits

Suits someone who is careful and precise with measurements, steady with fragile heavy materials, and does not mind working on building sites.

The setting: Shops, building sites and vehicles, with heavy glass, precise measuring, outdoor weather and work at heights on some jobs.

Try it first, this month

Take a woodworking or construction tech class to practise measuring and fitting, or ask a local glass and window shop about a job shadow day.

Or watch it done: Walk past a building under construction with a guide and see how large glass panels and metal frames are lifted into place. Watch only: never do regulated or risky work to try a trade.

The official route

The Architectural Glass and Metal Technician apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
424A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 10
In-school training
720 hours, 3 levels
On-the-job training
7,280 hours
Total
8,000 hours (approximately four years, by Skilled Trades Ontario's estimate)
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

What school covers

Tools and equipmentMaterial handling and liftsCutting and shaping glassGlazing systemsSeals and caulkingWindows, doors and curtain walls

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Architectural Glass and Metal Technician and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Architectural Glass and Metal Technician apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Measuring accuratelyReading drawingsGlass types and usesBuilding envelope basics

Make something to show

Draw a paper storefront window plan with measurements and a materials list for a fictional building.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A glazing contractor, or your school's OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Lead glazierFacade specialistEstimatorGlazing contractor

Ask an employer

Before you sign on, or on a job shadow day.

  • Which jobs need fall protection, and how are new workers trained to handle glass?
  • How much of the work is shop fabrication versus site installation?

What it pays in Ontario

Job Bank's Ontario figures for NOC 73111, Glaziers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$20.68
Median
$30.00
High
$44.70

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Limited" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Architectural Glass and Metal Technician in Ontario?
No. Architectural Glass and Metal Technician is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Architectural Glass and Metal Technician apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately four years.
Is Architectural Glass and Metal Technician a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Architectural Glass and Metal Technician apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.