Industrial trade · Ontario · Trade code 442A
Industrial Electrician
You install and fix the electrical systems that run factories and large plants, including motors, controls, wiring and automated equipment.
What you'd do
- Read electrical drawings and plan wiring runs
- Install wiring, motors and control panels in industrial equipment
- Test circuits to find why a machine has stopped
- Program and adjust control equipment
- Do regular checks to catch problems before breakdowns
Who hires
Who it suits
Suits someone who likes logic and problem-solving, is careful and safety-minded, and enjoys both hands-on work and thinking through how systems connect.
The setting: Indoor plant and factory settings, with some climbing, lifting, confined spaces and shift work, troubleshooting live equipment under strict electrical safety procedures.
Try it first, this month
Take a tech or electronics class, ask a teacher about a safe low-voltage circuit kit you can build at school, and ask your guidance counsellor about OYAP.
Or watch it done: Visit a college open house to see an industrial controls lab and talk with instructors about how motors and controls are taught. Watch only: never do regulated or risky work to try a trade.
The official route
The Industrial Electrician apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 442A
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- Yes
- Minimum education
- Grade 12
- In-school training
- 1,050 hours, 4 levels
- On-the-job training
- 7,950 hours
- Total
- 9,000 hours (approximately five years, by Skilled Trades Ontario's estimate)
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
- St. Clair College, Windsor campus: Block or part-time release, listed on the college's own page.
- Lambton College, Sarnia: Apprenticeship in-school training, listed on the college's own page.
How to start
Meet the entry standard (Grade 12)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program. For this trade, Support Ontario Youth's group sponsorship can register and sponsor you on an employer's behalf, if you are hired by an employer that works with them.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Sources: Skilled Trades Ontario: Industrial Electrician and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Industrial Electrician apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageCanada Apprentice Loan
Up to $4,000, interest-free
For your technical training in a Red Seal trade. A loan, so it is repaid.
Official pageRed Seal Completion Bonus
$5,000
Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a fictional motor start and stop control diagram on paper, labelling each component and writing a plain-language description of how it works.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A licensed electrical contractor, a plant maintenance supervisor, or the school OYAP recruiter.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Do apprentices rotate through shifts, and which control equipment will I learn on?
- How do you teach lockout and electrical safety before I work on live systems?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72201, Industrial electricians, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $29.00
- Median
- $40.50
- High
- $48.00
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Questions people ask
- Do you need a licence to work as a Industrial Electrician in Ontario?
- No. Industrial Electrician is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
- How long is the Industrial Electrician apprenticeship?
- 9,000 hours in total: 7,950 on the job and 1,050 in school, over 4 levels of in-school training. Skilled Trades Ontario puts that at approximately five years.
- Is Industrial Electrician a Red Seal trade?
- Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
- What grants can a Industrial Electrician apprentice get in Ontario?
- Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Industrial Mechanic MillwrightYou keep factory machines running, installing, adjusting and repairing everything from conveyors and pumps to presses and generators.433A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?