Launch League

Industrial trade · Ontario · Trade code 443A

Pattern Maker

Pattern Makers build the wooden, metal and plastic models that foundries press into sand to cast metal parts. You read engineering drawings and shape materials to very exact sizes.

What you'd do

  • Read engineering drawings to plan a new pattern
  • Cut and shape wood, plastic or metal on shop machines
  • Build core boxes that form hollow spaces inside castings
  • Check finished patterns against measurements
  • Fix worn patterns so a foundry can keep using them

Who hires

FoundriesManufacturingTooling companies

Who it suits

Suits someone who likes working indoors with their hands, enjoys precise measuring, and gets satisfaction from building something exactly right.

The setting: Indoor shop work with wood, plastic and metal, using saws, lathes, mills and measuring tools to build patterns and core boxes from detailed drawings.

Try it first, this month

Take a woodworking or manufacturing tech class and build a small project to a drawing. Ask a local machine shop or foundry about a short job shadow visit.

Or watch it done: Visit a college manufacturing lab or a foundry open house to see a pattern and the metal part cast from it. Watch only: never do regulated or risky work to try a trade.

The official route

The Pattern Maker apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
443A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
720 hours, 3 levels
On-the-job training
7,280 hours
Total
8,000 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Shop safetyReading pattern drawingsMachining wood and metalPattern and core box buildingShop math

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Pattern Maker and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Pattern Maker apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading engineering drawingsCasting basicsWoodworking and metalworking terms3D CAD modelling

Make something to show

Create a scaled drawing of a fictional casting pattern, noting the extra allowance for shrinkage and the draft angles.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A foundry or pattern shop owner, or a college program coordinator in machining or tooling.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Prototype technicianToolmakerCAD design technologistPattern shop lead

Ask an employer

Before you sign on, or on a job shadow day.

  • Which machines and software will I learn, and in what order?
  • How are drawing and measuring skills taught to new apprentices?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Pattern Maker in Ontario?
No. Pattern Maker is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Pattern Maker apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training.
Is Pattern Maker a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Pattern Maker apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.