Industrial trade · Ontario · Trade code 630T
Tool/Tooling Maker
You make the precise tools, moulds and fixtures that factories use to build other products, working from detailed drawings.
What you'd do
- Read engineering drawings and plan each part
- Cut metal on manual and computer-controlled machines
- Build and assemble custom tools and jigs
- Measure parts to very small tolerances
- Test and adjust a tool until it works right
Who hires
Who it suits
Suits someone who loves precision and problem-solving, enjoys making things from scratch, and has the patience to get small details exactly right.
The setting: Machine shop with cutting machines, noise, metal chips, close measuring and one-of-a-kind jobs built from detailed drawings.
Try it first, this month
Take a manufacturing or machine shop tech class at school, or ask a local machine shop or tool and die shop about a job shadow day.
Or watch it done: Visit a manufacturing trade show or school shop open house to see finished dies, jigs and fixtures on display. Watch only: never do regulated or risky work to try a trade.
The official route
The Tool/Tooling Maker apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 630T
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 720 hours, 3 levels
- On-the-job training
- 7,280 hours
- Total
- 8,000 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Active. Taking new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 12)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Sources: Skilled Trades Ontario: Tool/Tooling Maker and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Tool/Tooling Maker apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageOntario Apprenticeship Completion Bonus
$2,000
When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Sketch a simple fixture for a fictional part, with dimensions and an inspection checklist for checking it.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A tool and die shop supervisor, or a college machining program coordinator.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which skills separate tool making from general machining in your shop?
- How do apprentices move from simple jobs to building complete tools?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72101, Tool and die makers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $22.00
- Median
- $34.00
- High
- $42.50
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Limited" (2025-2027). See the Job Bank report.
Want the longer version, with a day in the job and who hates it? Read our full career guide.
Questions people ask
- Do you need a licence to work as a Tool/Tooling Maker in Ontario?
- No. Tool/Tooling Maker is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
- How long is the Tool/Tooling Maker apprenticeship?
- 8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training.
- Is Tool/Tooling Maker a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What grants can a Tool/Tooling Maker apprentice get in Ontario?
- Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Tool and Die MakerTool and Die Makers build and repair the specialized tools, dies and fixtures that factories use to make parts. You work from drawings and machine metal to very exact sizes.430A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Machine Tool Builder and IntegratorYou build precision machine parts and put together industrial machines, using drawings and metal cutting tools to make exact fits.430M · Non-compulsory
- Mould MakerYou design, build and repair the moulds used to mass produce plastic and metal parts, working to very exact measurements.431A · Non-compulsory
- Optics Technician (Lens and Prism Maker)You grind and polish very precise lenses and prisms, check them with special instruments and coat them for use in devices like cameras and microscopes.225A · Non-compulsory
Not sure which trade fits?