Launch League

Industrial trade · Ontario · Trade code 430M

Machine Tool Builder and Integrator

You build precision machine parts and put together industrial machines, using drawings and metal cutting tools to make exact fits.

What you'd do

  • Read complex drawings and parts lists
  • Cut and shape metal parts using saws, drills and grinders
  • Run computer-controlled machines to make parts
  • Check parts with precise measuring tools
  • Assemble parts into working machines

Who hires

Automation companiesMachine buildersAutomotive manufacturing

Who it suits

Suits someone who likes precision, math and measuring, enjoys working with machines and tools, and takes pride in exact, careful work.

The setting: Mostly indoor shop work building machines from drawings, with precision machining, assembling electrical and mechanical parts, and possible time at customer plants for setup.

Try it first, this month

Take a machining or manufacturing tech class, and ask a local machine shop about a tour or job shadow day.

Or watch it done: Tour a college machining and automation lab to see how a multi-part machine is assembled and tested. Watch only: never do regulated or risky work to try a trade.

The official route

The Machine Tool Builder and Integrator apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
430M
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
720 hours, 3 levels
On-the-job training
7,280 hours
Total
8,000 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Machine Tool Builder and Integrator and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Machine Tool Builder and Integrator apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading assembly drawingsBills of materialsPneumatic and automation basicsAcceptance testing steps

Make something to show

Sketch a fictional automated work cell on paper, with a parts list and a checklist the builder would use to prove it works before delivery.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A machine builder or automation integrator, or a college program coordinator in machining or automation.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Automation integratorCommissioning leadProject managerMachine design technician

Ask an employer

Before you sign on, or on a job shadow day.

  • How much of the work happens at customer plants, and how much travel is involved?
  • How do apprentices learn drawings, machining and electrical assembly together?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72405, Machine fitters, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$24.42
Median
$33.69
High
$46.31

Per hour, reference period 2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Limited" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Machine Tool Builder and Integrator in Ontario?
No. Machine Tool Builder and Integrator is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Machine Tool Builder and Integrator apprenticeship?
8,000 hours in total: 7,280 on the job and 720 in school, over 3 levels of in-school training.
Is Machine Tool Builder and Integrator a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Machine Tool Builder and Integrator apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.