Launch League

Industrial trade · Ontario · Trade code 602C

Tool and Cutter Grinder

Tool and Cutter Grinders shape and sharpen the cutting tools used in machine shops. You set up grinding machines and check the results with precise measuring tools.

What you'd do

  • Set up grinding machines
  • Shape and sharpen cutting tools
  • Measure tools with precision gauges
  • Read drawings and tool specifications
  • Adjust the grinder to get the right edge

Who hires

Tooling shopsMachine shopsManufacturing plants

Who it suits

Suits someone who likes precise machine work, measuring, and shop settings where small details matter.

The setting: Indoor machine shop work with guarded, high speed grinders, noise, fine dust and coolant, with precise measuring and exact setups.

Try it first, this month

Take a machining or manufacturing tech class, and ask a local machine shop about a job shadow day. Learning to read a vernier caliper is a good first skill.

Or watch it done: Visit a college machining lab and watch a cutting tool sharpened and checked on a grinder. Watch only: never do regulated or risky work to try a trade.

The official route

The Tool and Cutter Grinder apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
602C
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
No. You finish with a Certificate of Apprenticeship.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
240 hours, 1 level
On-the-job training
3,760 hours
Total
4,000 hours
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels to earn a Certificate of Apprenticeship.

Sources: Skilled Trades Ontario: Tool and Cutter Grinder and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Tool and Cutter Grinder apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Grinding conceptsCutting tool geometryPrecision measuringReading tool drawings

Make something to show

Draft a cutting tool inspection checklist, labelling the angles on a sample tool drawing.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A precision machining or tool sharpening shop, or a college machining program coordinator.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Toolroom specialistCNC tooling technicianGrinding business ownerShop supervisor

Ask an employer

Before you sign on, or on a job shadow day.

  • How do you measure accuracy and tool quality in your shop?
  • What eye, ear and grinder safety training do new people get?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Tool and Cutter Grinder in Ontario?
No. Tool and Cutter Grinder is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
How long is the Tool and Cutter Grinder apprenticeship?
4,000 hours in total: 3,760 on the job and 240 in school, over 1 level of in-school training.
Is Tool and Cutter Grinder a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Tool and Cutter Grinder apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.