Construction trade · Ontario · Trade code 401R
Refractory Mason
Refractory Masons build and repair the heat-proof linings inside furnaces, tanks and other very hot equipment. You lay special bricks and materials that can take extreme heat.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Lay heat-resistant brick inside furnaces
- Mix and apply special cement and linings
- Cut brick to fit curved or odd shapes
- Tear out worn linings
- Check measurements against drawings
Who hires
Who it suits
Suits someone who likes hands-on masonry, working on industrial sites, and building things that have to be fitted carefully.
The setting: Industrial sites working in or near furnaces and tanks, laying heat resistant materials, with heavy lifting, dust, heat and cramped spaces.
Try it first, this month
Take a construction tech class and try a small supervised brick or paver project at home. Ask a local masonry contractor about a job shadow day.
Or watch it done: Visit a masonry or building heritage display at a trade school or museum showing how heat resistant brick is laid. Watch only: never do regulated or risky work to try a trade.
The official route
The Refractory Mason apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 401R
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- C of Q in related trade
- In-school training
- 240 hours, 1 level
- On-the-job training
- 4,000 hours
- Total
- 4,240 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: Refractory Mason and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a labelled cross-section of a fictional furnace lining, showing each material layer and why it was chosen.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
An industrial furnace maintenance firm, or a college program coordinator who can point to related masonry routes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Since this trade is closed to new apprentices, which masonry route do you suggest?
- Can I learn this work through employer training, and how is it paid?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Refractory Mason in Ontario?
- No. Refractory Mason is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Refractory Mason apprenticeship?
- 4,240 hours in total: 4,000 on the job and 240 in school, over 1 level of in-school training.
- Is Refractory Mason a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is C of Q in related trade. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Brick and Stone MasonYou build walls, chimneys, fireplaces and paved areas out of brick, block and stone, and repair old masonry.401A · Non-compulsory
- Restoration MasonRestoration Masons repair old brick and stone buildings. You clean, repair and replace worn materials so historic walls last and look right.244H · Non-compulsory
- Architectural Glass and Metal TechnicianYou cut, fit and install glass, windows, storefronts and metal frames on buildings, and fix them when they are cracked or damaged.424A · Non-compulsory
- Cement (Concrete) FinisherYou pour, level and smooth concrete to make floors, sidewalks, driveways and pads, finishing it with different textures.244G · Non-compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Construction BoilermakerYou build and repair big metal tanks, boilers and pressure vessels that hold steam, gas, oil or water without leaking.428A · Non-compulsory
Not sure which trade fits?