Launch League

Motive power trade · Ontario · Trade code 435A

Small Engine Technician

Small Engine Technicians repair the engines in equipment like lawn mowers, chainsaws, snowmobiles and ATVs. You work out what is wrong and get it running again.

What you'd do

  • Diagnose engines that will not start
  • Repair fuel and electrical systems
  • Replace worn parts like belts and spark plugs
  • Fix brakes, steering and suspension
  • Test the machine before returning it

Who hires

Equipment dealershipsOutdoor power service shops

Who it suits

Suits someone who likes tinkering with engines, working in a shop, and figuring out puzzles that involve moving parts.

The setting: Indoor shop work, plus yard work at dealerships, on engines for mowers, trimmers and off-road equipment, busiest in warm months, with oil, fuel and lifting.

Try it first, this month

Take an auto or small engine tech class, or ask a local equipment dealer for a job shadow day. Helping an adult change the oil or blades on a mower is a good start.

Or watch it done: Visit an equipment dealer open house or farm show and ask technicians how engines are diagnosed. Watch only: never do regulated or risky work to try a trade.

The official route

The Small Engine Technician apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
435A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
No
Minimum education
Grade 12
In-school training
480 hours, 2 levels
On-the-job training
4,520 hours
Total
5,000 hours (approximately two and a half years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Work practices and proceduresElectrical systemsFuel systemsEngine systemsSteering, suspension and brakesTransmissions and frames

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Small Engine Technician and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Small Engine Technician apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$1,000

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in motive power, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Small engine partsFour-stroke and two-stroke basicsFuel and ignition conceptsService checklists

Make something to show

Write a seasonal service checklist for fictional lawn equipment, listing what to inspect and what to record for the owner.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

An outdoor power equipment dealer service manager, or a college small engine program coordinator.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Equipment service managerMobile repair businessHeavy equipment technicianDealership technician

Ask an employer

Before you sign on, or on a job shadow day.

  • What work is there in winter, after lawn and garden season ends?
  • How is diagnostic skill taught beyond simple repairs?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72429, Other small engine and small equipment repairers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$17.95
Median
$26.00
High
$28.00

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Small Engine Technician in Ontario?
No. Small Engine Technician is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Small Engine Technician apprenticeship?
5,000 hours in total: 4,520 on the job and 480 in school, over 2 levels of in-school training. Skilled Trades Ontario puts that at approximately two and a half years.
Is Small Engine Technician a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Small Engine Technician apprentice get in Ontario?
Ontario's Tools Grant is 1,000 for motive power trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.