Industrial trade · Ontario · Trade code 278B
Surface Blaster
Surface Blasters plan and carry out controlled blasts to break up rock at quarries, mines and construction sites. You check the area, set up the blast and review the results.
What you'd do
- Check the area and keep people clear
- Plan where blast holes go
- Load blast holes
- Connect and set off the blast
- Check the results afterward
Who hires
Who it suits
Suits someone who is careful, follows rules exactly, and is comfortable working outdoors on rugged sites.
The setting: Outdoor quarry, mine and construction sites in all weather, planning blasts, controlling access, loading blast holes with explosives and checking results under strict safety rules.
Try it first, this month
Take geography, earth science or math classes. Ask your guidance counsellor about a quarry or mine tour with a licensed employer. Blasting is for trained, certified workers only.
Or watch it done: Ask a mine or quarry for a tour from a safe viewing area, or a college program for a blast design simulation. Watch only: never do regulated or risky work to try a trade.
The official route
The Surface Blaster apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 278B
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 360 hours, 2 levels
- On-the-job training
- 2,240 hours
- Total
- 2,600 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Active. Taking new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 12)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Sources: Skilled Trades Ontario: Surface Blaster and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Surface Blaster apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageOntario Apprenticeship Completion Bonus
$2,000
When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Make a fictional pre-blast site checklist covering exclusion zones, warnings and records, using public safety guidance. It is a paper exercise with no explosives involved.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A quarry or mine safety supervisor, a college mining or earth science program coordinator, or the school guidance counsellor.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- What licences and screening are needed before I handle explosives?
- How do apprentices learn blast planning and site safety before loading holes?
What it pays in Ontario
Job Bank's Ontario figures for NOC 73402, Drillers and blasters - surface mining, quarrying and construction, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $26.00
- Median
- $35.00
- High
- $47.28
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Questions people ask
- Do you need a licence to work as a Surface Blaster in Ontario?
- No. Surface Blaster is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
- How long is the Surface Blaster apprenticeship?
- 2,600 hours in total: 2,240 on the job and 360 in school, over 2 levels of in-school training.
- Is Surface Blaster a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What grants can a Surface Blaster apprentice get in Ontario?
- Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Surface Mount AssemblerSurface Mount Assemblers build electronic circuit boards. You place tiny parts, solder them in place and check that each board works.630B · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?