Launch League

Construction trade · Ontario · Trade code 451A

Drywall, Acoustic and Lathing Applicator

You build the inside walls and ceilings of buildings by putting up metal studs, hanging drywall, and adding insulation.

What you'd do

  • Measure and frame walls with metal studs
  • Cut and hang drywall sheets
  • Install suspended ceiling grids and tiles
  • Fit insulation for heat and sound
  • Read plans to lay out partitions

Who hires

Interior systems contractorsCommercial construction

Also searched as: Drywaller.

Who it suits

Suits someone who likes building, measuring accurately, and physical work indoors on construction sites.

The setting: Indoor building interiors with overhead lifting, lifts and ladders, steel studs, dust and precise layout of walls and ceilings.

Try it first, this month

Take a construction class at school, or ask a local contractor about a job shadow to watch a crew frame and board a room.

Or watch it done: Join a building tour or workshop where installers explain ceiling grids and wall framing from the floor. Watch only: never do regulated or risky work to try a trade.

The official route

The Drywall, Acoustic and Lathing Applicator apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
451A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 10
In-school training
600 hours, 2 levels
On-the-job training
4,800 hours
Total
5,400 hours (approximately three years, by Skilled Trades Ontario's estimate)
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

What school covers

Trade knowledge and safetyTrade calculationsPlan readingWalls and ceilingsInsulation theoryMetal cutting and welding

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Drywall, Acoustic and Lathing Applicator and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Drywall, Acoustic and Lathing Applicator apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading building drawingsMetal stud systemsCeiling system layoutEstimating materials

Make something to show

Draw a scaled floor plan for a fictional office, showing walls and ceiling grid with a materials list.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

An interior systems contractor, or a union local for the trade.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Lead installerInterior systems forepersonContractor

Ask an employer

Before you sign on, or on a job shadow day.

  • What fall protection and lift training do apprentices need?
  • How much of the work is on ladders and lifts?

What it pays in Ontario

Job Bank's Ontario figures for NOC 73102, Plasterers, drywall installers and finishers and lathers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$24.00
Median
$35.48
High
$48.73

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Drywall, Acoustic and Lathing Applicator in Ontario?
No. Drywall, Acoustic and Lathing Applicator is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Drywall, Acoustic and Lathing Applicator apprenticeship?
5,400 hours in total: 4,800 on the job and 600 in school, over 2 levels of in-school training. Skilled Trades Ontario puts that at approximately three years.
Is Drywall, Acoustic and Lathing Applicator a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Drywall, Acoustic and Lathing Applicator apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.