Construction trade · Ontario · Trade code 403A
General Carpenter
You build and repair houses and other structures, framing walls, building stairs and roofs, and making things from wood and other materials.
What you'd do
- Read plans and measure the work site
- Frame floors, walls and roofs
- Build forms for concrete foundations
- Install doors, windows and trim
- Cut and fasten materials with hand and power tools
Who hires
Also searched as: Carpenter.
Who it suits
Suits someone who likes building things, working outdoors and indoors, and solving measuring and layout puzzles.
The setting: Indoor and outdoor building sites with heavy lifting, hand and power tools, ladders, changing weather and detailed measuring.
Try it first, this month
Take a wood or construction class, build a small project like a birdhouse, or ask a local builder about a job shadow.
Or watch it done: Attend a builders home show or school build and see how a framing plan is laid out by a carpenter. Watch only: never do regulated or risky work to try a trade.
The official route
The General Carpenter apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 403A
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- Yes
- Minimum education
- Grade 10
- In-school training
- 720 hours, 3 levels
- On-the-job training
- 6,480 hours
- Total
- 7,200 hours (approximately four years, by Skilled Trades Ontario's estimate)
- Hours or competency
- Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
- St. Clair College, Windsor campus: Block or part-time release, listed on the college's own page.
- Lambton College, Sarnia: Apprenticeship in-school training, listed on the college's own page.
How to start
Meet the entry standard (Grade 10)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: General Carpenter and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a General Carpenter apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageCanada Apprentice Loan
Up to $4,000, interest-free
For your technical training in a Red Seal trade. A loan, so it is repaid.
Official pageRed Seal Completion Bonus
$5,000
Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a framing layout and full materials list for a fictional small shed, on paper.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A residential builder, or a union local for the trade.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Will I experience foundations, framing, finish work and renovations as an apprentice?
- What fall protection and tool training come first?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72310, Carpenters, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $22.00
- Median
- $32.00
- High
- $48.00
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Want the longer version, with a day in the job and who hates it? Read our full career guide.
Questions people ask
- Do you need a licence to work as a General Carpenter in Ontario?
- No. General Carpenter is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
- How long is the General Carpenter apprenticeship?
- 7,200 hours in total: 6,480 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately four years.
- Is General Carpenter a Red Seal trade?
- Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
- What grants can a General Carpenter apprentice get in Ontario?
- Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Architectural Glass and Metal TechnicianYou cut, fit and install glass, windows, storefronts and metal frames on buildings, and fix them when they are cracked or damaged.424A · Non-compulsory
- Brick and Stone MasonYou build walls, chimneys, fireplaces and paved areas out of brick, block and stone, and repair old masonry.401A · Non-compulsory
- Cement (Concrete) FinisherYou pour, level and smooth concrete to make floors, sidewalks, driveways and pads, finishing it with different textures.244G · Non-compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Construction BoilermakerYou build and repair big metal tanks, boilers and pressure vessels that hold steam, gas, oil or water without leaking.428A · Non-compulsory
- Construction Craft WorkerYou help build roads, bridges, buildings and pipelines by digging, pouring, laying and moving materials on all kinds of construction sites.450A · Non-compulsory
Not sure which trade fits?