Construction trade · Ontario · Trade code 420A
Ironworker Structural and Ornamental
You make and put up the steel frames and metal details of buildings and bridges, from beams to railings and stairs.
What you'd do
- Read drawings and lay out steel pieces to fit
- Weld and cut steel parts in the shop or on site
- Lift and place beams with cranes and rigging
- Bolt and connect steel pieces into a frame
- Install railings, stairs and metal features
Who hires
Also searched as: Ironworker.
Who it suits
Suits someone who is strong, likes working outdoors, handles heights well with safety gear, and takes pride in building things people use for years.
The setting: Outdoor work at height on buildings, bridges and towers in all weather, with heavy steel, welding and cutting, rigging and assembling cranes and hoists.
Try it first, this month
Take a welding or construction tech class, and ask a local steel fabrication shop about a supervised shadow day.
Or watch it done: Attend a trade school or training centre open house to see steel assembly and bolting in a controlled practice yard. Watch only: never do regulated or risky work to try a trade.
The official route
The Ironworker Structural and Ornamental apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 420A
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- Yes. Passing it earns a Certificate of Qualification.
- Red Seal in Ontario
- Yes
- Minimum education
- Grade 10
- In-school training
- 720 hours, 3 levels
- On-the-job training
- 5,280 hours
- Total
- 6,000 hours (approximately three and a half years, by Skilled Trades Ontario's estimate)
- Hours or competency
- Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
- Status
- Active. Taking new registrations.
What school covers
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 10)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: Ironworker Structural and Ornamental and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Ironworker Structural and Ornamental apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageCanada Apprentice Loan
Up to $4,000, interest-free
For your technical training in a Red Seal trade. A loan, so it is repaid.
Official pageRed Seal Completion Bonus
$5,000
Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Draw a fictional ornamental stair railing as a simple shop drawing, with a parts list and a numbered order of assembly.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A steel fabrication and erection contractor, or a union local for the trade.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- How much of the work is structural steel erection compared with ornamental metal?
- What height and rigging training do apprentices get before working on site?
What it pays in Ontario
Job Bank's Ontario figures for NOC 72105, Ironworkers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.
- Low
- $32.27
- Median
- $44.34
- High
- $50.25
Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.
Want the longer version, with a day in the job and who hates it? Read our full career guide.
Questions people ask
- Do you need a licence to work as a Ironworker Structural and Ornamental in Ontario?
- No. Ironworker Structural and Ornamental is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
- How long is the Ironworker Structural and Ornamental apprenticeship?
- 6,000 hours in total: 5,280 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately three and a half years.
- Is Ironworker Structural and Ornamental a Red Seal trade?
- Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
- What grants can a Ironworker Structural and Ornamental apprentice get in Ontario?
- Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Ironworker GeneralistYou build the steel frames of buildings and place the steel bars that strengthen concrete, working on construction sites outdoors.420B · Non-compulsory
- Architectural Glass and Metal TechnicianYou cut, fit and install glass, windows, storefronts and metal frames on buildings, and fix them when they are cracked or damaged.424A · Non-compulsory
- Brick and Stone MasonYou build walls, chimneys, fireplaces and paved areas out of brick, block and stone, and repair old masonry.401A · Non-compulsory
- Cement (Concrete) FinisherYou pour, level and smooth concrete to make floors, sidewalks, driveways and pads, finishing it with different textures.244G · Non-compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Construction BoilermakerYou build and repair big metal tanks, boilers and pressure vessels that hold steam, gas, oil or water without leaking.428A · Non-compulsory
Not sure which trade fits?