Launch League

Industrial trade · Ontario · Trade code 437A

Metal Fabricator (Fitter)

You build, assemble and repair metal products by reading drawings, cutting and shaping metal and joining pieces together.

What you'd do

  • Read drawings and plan the order of the work
  • Measure and mark metal for cutting
  • Cut and shape metal with machines and hand tools
  • Weld and fit parts together to match the plan
  • Check that finished pieces meet the measurements

Who hires

Structural steel fabricatorsEquipment manufacturers

Who it suits

Suits someone who likes hands-on building, math and measuring, enjoys seeing a drawing become a real object, and is comfortable in a shop.

The setting: Shop and site work with noise, heat, sparks and heavy steel, cutting, fitting and welding parts from drawings, using rigging and lifting equipment.

Try it first, this month

Take a welding or manufacturing class, and ask a local fab shop about a job shadow day.

Or watch it done: Visit a college fabrication lab or trade show where instructors demonstrate how a drawing becomes a finished assembly. Watch only: never do regulated or risky work to try a trade.

The official route

The Metal Fabricator (Fitter) apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
437A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 12
In-school training
720 hours, 3 levels
On-the-job training
4,680 hours
Total
5,400 hours (approximately four years, by Skilled Trades Ontario's estimate)
Hours or competency
Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
Status
Active. Taking new registrations.

What school covers

Trade practices and codesCalculations and shop formulasComputer use and documentationMetal fabrication theoryMachinery useWelding and cutting

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 12)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Sources: Skilled Trades Ontario: Metal Fabricator (Fitter) and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Metal Fabricator (Fitter) apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Blueprint readingMeasuring and layoutMetal propertiesBasic geometryWelding terms

Make something to show

Draw a fictional steel bracket with dimensions, a bill of materials and a simple inspection checklist for the finished part.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A fabrication shop supervisor, a union local for the trade, or the school OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Fabrication leadWelding inspectorShop supervisorMetalworking contractor

Ask an employer

Before you sign on, or on a job shadow day.

  • Which welding and layout skills should I have before starting?
  • How much of the day is fitting parts versus welding?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72104, Structural metal and platework fabricators and fitters, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$20.00
Median
$27.48
High
$37.00

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Limited" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Metal Fabricator (Fitter) in Ontario?
No. Metal Fabricator (Fitter) is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Metal Fabricator (Fitter) apprenticeship?
5,400 hours in total: 4,680 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately four years.
Is Metal Fabricator (Fitter) a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Metal Fabricator (Fitter) apprentice get in Ontario?
Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.