Industrial trade · Ontario · Trade code 611B
Saw Filer/Fitter
Saw Filer/Fitters keep the saws in sawmills sharp and running. You sharpen, repair and adjust blades so lumber is cut cleanly.
What you'd do
- Sharpen band saws and circular blades
- File and set saw teeth
- Repair damaged blades
- Adjust and fit blades to machines
- Work out why a saw is cutting poorly
Who hires
Who it suits
Suits someone who likes precise hand and machine work, enjoys sharp tools and mill settings, and can spot small problems by sight and sound.
The setting: Indoor mill or shop work, filing and sharpening saw blades, with noise, sharp edges and exact balancing, and checking machines for faults.
Try it first, this month
Take a woodworking class and learn how to care for hand tools. Ask a local sawmill or woodworking shop about a tour or job shadow day.
Or watch it done: Visit a sawmill or woodworking supply shop open house and watch blade sharpening from a guarded viewing area. Watch only: never do regulated or risky work to try a trade.
The official route
The Saw Filer/Fitter apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 611B
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- Grade 12
- In-school training
- 480 hours, 2 levels
- On-the-job training
- 8,000 hours
- Total
- 8,480 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Active. Taking new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
How to start
Meet the entry standard (Grade 12)
You must also be at least 16 and allowed to work in Canada.Find a sponsor
Usually an employer or a union who agrees to train you through the whole program.Register with Skilled Trades Ontario
You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.Train, log your skills, and certify
Finish your hours and in-school levels to earn a Certificate of Apprenticeship.
Sources: Skilled Trades Ontario: Saw Filer/Fitter and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Grants, loans and bonuses
Money you may be able to get
What applies to a Saw Filer/Fitter apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.
Ontario Tools Grant
$600
After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.
The amount is set by sector. We place this trade in industrial, but Skilled Trades Ontario's sector search did not confirm it, so check the amount when you apply.
Official pageApprentice Development Benefit
Living, travel and child care costs
While you attend full-time in-class training at a ministry-approved training delivery agent.
Official pageOntario Apprenticeship Completion Bonus
$2,000
When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.
Official pageEmployment Insurance
EI benefits
Eligible apprentices can get EI while attending technical training.
Official pageSOY Education Scholarship
One of 10 awards of $500
For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.
Official pageRead on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Make an illustrated inspection log comparing the tooth shapes of different saw blade types, with notes on common wear.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A sawmill maintenance supervisor, or an industrial saw service shop.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Which saw types will I learn first, and how is accuracy checked?
- What hearing and sharp tool safety training do you provide?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Saw Filer/Fitter in Ontario?
- No. Saw Filer/Fitter is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Saw Filer/Fitter apprenticeship?
- 8,480 hours in total: 8,000 on the job and 480 in school, over 2 levels of in-school training.
- Is Saw Filer/Fitter a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What grants can a Saw Filer/Fitter apprentice get in Ontario?
- Ontario's Tools Grant is 600 for industrial trades (check the amount when you apply), paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
- What do you need to start?
- The minimum education to register is Grade 12. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Metal Fabricator (Fitter)You build, assemble and repair metal products by reading drawings, cutting and shaping metal and joining pieces together.437A · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Electric Motor System TechnicianYou take apart, test and repair electric motors, generators and transformers, including rewinding the copper coils inside.446A · Non-compulsory
- Electrician (Signal Maintenance)You keep the signals and train control systems working so subways and trains can run safely on schedule.289F · Non-compulsory
- Elevating Devices MechanicYou install, service and repair elevators, escalators and lifts so people and goods can move safely through buildings.636E · Non-compulsory
Not sure which trade fits?