Launch League

Construction trade · Ontario · Trade code 306A

Plumber

Plumbers install and repair the pipes that bring clean water into buildings and carry waste out. You connect fixtures, find leaks and make sure systems meet code.

What you'd do

  • Cut, join and install water and drain pipes
  • Set sinks, toilets and water heaters in place
  • Find and fix leaks and blocked drains
  • Read building drawings to plan pipe routes
  • Test new piping before the walls are closed

Who hires

Plumbing contractorsInstitutionsService firms

Who it suits

Suits someone who likes solving practical problems, is comfortable in tight spaces and on different job sites, and does not mind messy work.

The setting: Indoor and outdoor work in homes and commercial buildings, in tight spaces and trenches, with pipe, tools and drawings, plus service calls that can include on-call work.

Try it first, this month

Ask a local plumbing company for a job shadow day, or take a construction tech class. At home, help an adult replace a tap washer or learn where the main shutoff valve is.

Or watch it done: Visit a trade school open house to watch pipe assembly and fixture installation demonstrated by instructors. Watch only: never do regulated or risky work to try a trade.

The official route

The Plumber apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
306A
Classification
Compulsory. You must be a registered apprentice or hold a certificate to work in this trade.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 10
In-school training
720 hours, 3 levels
On-the-job training
8,280 hours
Total
9,000 hours (approximately five years, by Skilled Trades Ontario's estimate)
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

What school covers

Workplace safety and riggingPipes, fittings and supportsPlumbing fixtures and appliancesDrainage and ventingWater supply systemsCodes and trade math

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program. For this trade, Support Ontario Youth's group sponsorship can register and sponsor you on an employer's behalf, if you are hired by an employer that works with them.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Plumber and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Plumber apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading plumbing drawingsWater and drainage conceptsPlumbing code basicsMaterial takeoffs

Make something to show

Draw a fictional bathroom pipe layout as an isometric diagram with a materials list.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A licensed plumbing contractor, a union local for the trade, or the school OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Master plumberService managerPlumbing contractorHydronic specialist

Ask an employer

Before you sign on, or on a job shadow day.

  • How much work is new construction versus emergency service and on-call time?
  • What jobs will I do in my first year?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72300, Plumbers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$20.00
Median
$32.50
High
$50.38

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Want the longer version, with a day in the job and who hates it? Read our full career guide.

Questions people ask

Do you need a licence to work as a Plumber in Ontario?
Yes. Plumber is a compulsory trade, so to work in it legally you must be a registered apprentice, or hold a Provisional Certificate of Qualification or a Certificate of Qualification, and appear on the Skilled Trades Ontario Public Register.
How long is the Plumber apprenticeship?
9,000 hours in total: 8,280 on the job and 720 in school, over 3 levels of in-school training. Skilled Trades Ontario puts that at approximately five years.
Is Plumber a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Plumber apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.