Launch League

Construction trade · Ontario · Trade code 244K

Precast Concrete Erector

Precast Concrete Erectors put factory-made concrete pieces into place on building sites. You guide each piece to its spot, line it up and fasten it down.

What you'd do

  • Unload and store precast pieces on site
  • Survey the site before pieces go in
  • Guide pieces into place and line them up
  • Bolt or weld pieces together
  • Grout and secure connections between units

Who hires

Precast erection contractorsIndustrial building sites

Who it suits

Suits someone who likes outdoor construction, working as part of a crew, and fitting large pieces together accurately.

The setting: Outdoor construction sites in all weather, working beside cranes to unload, align and connect heavy concrete pieces, including bolting and welding.

Try it first, this month

Take a construction tech class or ask a local concrete or building supply company about a job shadow day. Building a small framed project at home also builds the measuring habits this work needs.

Or watch it done: Visit a trade school open house or watch a precast delivery from a safe public spot to see how pieces are lifted and placed. Watch only: never do regulated or risky work to try a trade.

The official route

The Precast Concrete Erector apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
244K
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
No. You finish with a Certificate of Apprenticeship.
Red Seal in Ontario
No
Minimum education
Grade 10
In-school training
600 hours, 2 levels
On-the-job training
4,800 hours
Total
5,400 hours
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels to earn a Certificate of Apprenticeship.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Precast Concrete Erector and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Precast Concrete Erector apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Ontario Apprenticeship Completion Bonus

$2,000

When you finish a non-Red Seal trade and are out of high school. Apply within 180 days of your certificate. Taxable.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading erection drawingsLift sequencingRigging signal awarenessBasic geometry

Make something to show

Make a storyboard showing the order in which fictional precast wall panels would be lifted and set, with notes on each step.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A precast concrete company, a union local for the trade, or the school OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Precast site forepersonCrane coordinatorConstruction managerSafety coordinator

Ask an employer

Before you sign on, or on a job shadow day.

  • How are lift plans and connection checks shared with apprentices?
  • What heights, rigging and welding training do I get first?

What it pays in Ontario

Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.

Questions people ask

Do you need a licence to work as a Precast Concrete Erector in Ontario?
No. Precast Concrete Erector is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
How long is the Precast Concrete Erector apprenticeship?
5,400 hours in total: 4,800 on the job and 600 in school, over 2 levels of in-school training.
Is Precast Concrete Erector a Red Seal trade?
Not in Ontario. Certification is provincial.
What grants can a Precast Concrete Erector apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a non-Red Seal trade, you may get Ontario's $2,000 Apprenticeship Completion Bonus when you finish. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.