Construction trade · Ontario · Trade code 244L
Precast Concrete Finisher
Precast Concrete Finishers get factory-made concrete pieces ready to leave the plant. You repair chips, smooth surfaces and clean them up so they look right.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Patch chips and cracks in concrete pieces
- Smooth and finish concrete surfaces
- Clean pieces before they ship
- Mix and apply grout
- Mark pieces so crews know where they go
Who hires
Who it suits
Suits someone who likes careful, hands-on finishing work and cares about how a surface looks up close.
The setting: Indoor precast plant work, repairing, cleaning and finishing concrete surfaces by hand, with dust, kneeling or bending and attention to quality.
Try it first, this month
Take a construction tech or art class that uses cement or plaster, or try a small supervised patching job at home with an adult. Ask a local concrete plant about touring the shop.
Or watch it done: Visit a concrete plant open house or a college construction lab to see how finished panels are checked. Watch only: never do regulated or risky work to try a trade.
The official route
The Precast Concrete Finisher apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 244L
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- Grade 10
- In-school training
- 600 hours, 2 levels
- On-the-job training
- 3,900 hours
- Total
- 4,500 hours
- Hours or competency
- Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.
Sources: Skilled Trades Ontario: Precast Concrete Finisher and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Make a panel quality inspection checklist using fictional defects, with a rating scale and a note on what would be repaired.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A precast concrete plant quality supervisor, or a college program coordinator who can point to related construction routes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Since this trade is closed to new apprentices, which route do you hire from?
- What dust and safety protections do finishers use?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Precast Concrete Finisher in Ontario?
- No. Precast Concrete Finisher is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Precast Concrete Finisher apprenticeship?
- 4,500 hours in total: 3,900 on the job and 600 in school, over 2 levels of in-school training.
- Is Precast Concrete Finisher a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More construction trades
Related trades
- Cement (Concrete) FinisherYou pour, level and smooth concrete to make floors, sidewalks, driveways and pads, finishing it with different textures.244G · Non-compulsory
- Precast Concrete ErectorPrecast Concrete Erectors put factory-made concrete pieces into place on building sites. You guide each piece to its spot, line it up and fasten it down.244K · Non-compulsory
- Concrete Pump OperatorYou run the pump that pushes wet concrete from the mixer truck to exactly where builders need it, sometimes high up through a long boom arm.637C · Non-compulsory
- Drywall Finisher and PlastererYou tape and smooth drywall and apply plaster to walls and ceilings so rooms look finished, with decorative touches like mouldings and textures.453A · Non-compulsory
- Architectural Glass and Metal TechnicianYou cut, fit and install glass, windows, storefronts and metal frames on buildings, and fix them when they are cracked or damaged.424A · Non-compulsory
- Brick and Stone MasonYou build walls, chimneys, fireplaces and paved areas out of brick, block and stone, and repair old masonry.401A · Non-compulsory
Not sure which trade fits?