Launch League

Construction trade · Ontario · Trade code 452A

Reinforcing Rodworker

Reinforcing Rodworkers place the steel bars and mesh that go inside concrete to make it stronger. You work on buildings, bridges and other large structures, often outdoors.

What you'd do

  • Read drawings showing where steel goes
  • Cut and bend steel bars
  • Tie bars into cages and mats
  • Place post-tensioning cables
  • Check that steel is in the right spot before concrete is poured

Who hires

Rebar contractorsInfrastructure projectsLarge construction sites

Who it suits

Suits someone who likes physical outdoor work, working in a crew, and being part of building large structures.

The setting: Outdoor construction sites in all weather, cutting, bending and tying steel bars, heavy repetitive lifting, working at height, rigging and some welding.

Try it first, this month

Take a construction tech class and ask your guidance counsellor about OYAP or co-op. Ask a local construction company about a job shadow day on a site.

Or watch it done: Visit a trade school or union training centre open house to see steel bar bending and placement on practice forms. Watch only: never do regulated or risky work to try a trade.

The official route

The Reinforcing Rodworker apprenticeship

These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.

Trade code
452A
Classification
Non-compulsory. You can work in this trade without a certificate.
Certifying exam
Yes. Passing it earns a Certificate of Qualification.
Red Seal in Ontario
Yes
Minimum education
Grade 10
In-school training
360 hours, 2 levels
On-the-job training
3,640 hours
Total
4,000 hours (approximately two and a half years, by Skilled Trades Ontario's estimate)
Hours or competency
Hours-based: you must complete the full prescribed hours on the job, and a ratio of 1 journeyperson to 1 apprentice applies.
Status
Active. Taking new registrations.

What school covers

Trade practices and mathReading reinforcing drawingsFabricating reinforcing steelInstalling and inspecting steelRigging and hoistingPost-tensioning

Where the in-school training happens

In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.

How to start

  1. In high school, get close to the work

    Take the matching tech class, ask about co-op, and look at OYAP and the SHSM.
  2. Meet the entry standard (Grade 10)

    You must also be at least 16 and allowed to work in Canada.
  3. Find a sponsor

    Usually an employer or a union who agrees to train you through the whole program.
  4. Register with Skilled Trades Ontario

    You and your sponsor sign a training agreement. At 16 or 17 you apply with a parent or guardian's consent.
  5. Train, log your skills, and certify

    Finish your hours and in-school levels, then write the certifying exam for your Certificate of Qualification.

Safety training: on construction projects, Ontario requires anyone who uses fall protection to complete an approved working at heights program. Ask your employer which safety courses you need before your first day.

Sources: Skilled Trades Ontario: Reinforcing Rodworker and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.

Grants, loans and bonuses

Money you may be able to get

What applies to a Reinforcing Rodworker apprentice in Ontario, based on this trade's sector and Red Seal status. Each program has its own conditions, so check the official page before you count on it.

Ontario Tools Grant

$600

After you finish (or are exempted from) level one in-class training and have been registered at least 12 months. Taxable, not repaid.

Official page

Apprentice Development Benefit

Living, travel and child care costs

While you attend full-time in-class training at a ministry-approved training delivery agent.

Official page

Canada Apprentice Loan

Up to $4,000, interest-free

For your technical training in a Red Seal trade. A loan, so it is repaid.

Official page

Red Seal Completion Bonus

$5,000

Once you complete the apprenticeship and earn your Red Seal certification (on or after April 1, 2025). Applications open November 16, 2026.

Official page

Employment Insurance

EI benefits

Eligible apprentices can get EI while attending technical training.

Official page

SOY Education Scholarship

One of 10 awards of $500

For registered Ontario apprentices at Level 2 or higher, any trade. Paid to your school toward fees. Check whether the current round is open.

Official page

Read on ontario.ca, canada.ca and supportontarioyouth.ca on 8 November 2026. Not in school yet? Ontario's pre-apprenticeship training is free, including books, safety gear and tools. See every program in our apprenticeship grants guide.

Get ready now

Start before you apply

What to learn and make while you are still in school, so you walk into an employer's shop with something to show.

Skills to start building

Reading structural drawingsBar schedulesBasic geometryConcrete cover concepts

Make something to show

Prepare a bar cut and bend schedule from a fictional slab plan, listing sizes, lengths and counts.

Paper and screen only. Bring it to a job shadow or interview.

Who to talk to first

A reinforcing steel contractor, a union local for the trade, or the school OYAP recruiter.

In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.

Where it can lead

Paths people take after they certify, with more experience or more training.

Rebar forepersonConstruction leadReinforcing contractorRigging specialist

Ask an employer

Before you sign on, or on a job shadow day.

  • What height and rigging training do apprentices complete before going on site?
  • How heavy is a typical day, and how is lifting managed safely?

What it pays in Ontario

Job Bank's Ontario figures for NOC 72105, Ironworkers, the occupation group this trade falls in. They cover everyone in that group, not only certified tradespeople. Apprentices are usually paid less while they train.

Low
$32.27
Median
$44.34
High
$50.25

Per hour, reference period 2023-2024, updated by Job Bank November 19, 2025. Job Bank rates the 3-year outlook in Ontario as "Moderate" (2025-2027). See the Job Bank report.

Questions people ask

Do you need a licence to work as a Reinforcing Rodworker in Ontario?
No. Reinforcing Rodworker is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Qualification are still the recognized proof of your skills.
How long is the Reinforcing Rodworker apprenticeship?
4,000 hours in total: 3,640 on the job and 360 in school, over 2 levels of in-school training. Skilled Trades Ontario puts that at approximately two and a half years.
Is Reinforcing Rodworker a Red Seal trade?
Yes. In Ontario it is part of the Interprovincial Red Seal Program, the national standard for the trade, which makes it easier to work in other provinces.
What grants can a Reinforcing Rodworker apprentice get in Ontario?
Ontario's Tools Grant is 600 for construction trades, paid after level one and 12 months of registration. As a Red Seal trade, you may also get the interest-free Canada Apprentice Loan (up to $4,000) and the federal $5,000 Red Seal Completion Bonus when you certify. The Apprentice Development Benefit and Employment Insurance can help while you are in class.
What do you need to start?
The minimum education to register is Grade 10. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.