Industrial trade · Ontario · Trade code 239B
Tool and Gauge Inspector
Tool and Gauge Inspectors check that tools, dies and gauges are made correctly. You measure each piece, test how it works and report anything that is off.
This apprenticeship program is inactive. Skilled Trades Ontario is not accepting new apprenticeship registrations in this trade. Apprentices already registered should contact Skilled Trades Ontario about their program. If this is the work you want, look at the related trades below, which are taking new apprentices.
Source: Skilled Trades Ontario trade page, Skilled Trades Ontario, STO initiates review of 18 apprenticeship programs.
What you'd do
- Measure parts with precision gauges
- Check tools against drawings
- Test dies and fixtures for fit
- Adjust or send back faulty pieces
- Write up inspection results
Who hires
Who it suits
Suits someone who is detail-minded, patient with measuring, and happy to be the person who catches small mistakes.
The setting: Indoor quality lab or shop work, inspecting and testing tools, dies and gauges with precision instruments, with careful records and sitting or standing at a bench.
Try it first, this month
Take a machining or technology class and practice measuring with a ruler and calipers. Ask a local manufacturer about a tour of its quality department.
Or watch it done: Visit a college metrology lab to see a coordinate measuring machine check a tooling part. Watch only: never do regulated or risky work to try a trade.
The official route
The Tool and Gauge Inspector apprenticeship
These facts are copied from Skilled Trades Ontario's Apprenticeship Programs Quick Facts Chart.
- Trade code
- 239B
- Classification
- Non-compulsory. You can work in this trade without a certificate.
- Certifying exam
- No. You finish with a Certificate of Apprenticeship.
- Red Seal in Ontario
- No
- Minimum education
- C of Q in related trade
- In-school training
- 170 hours, 1 level
- On-the-job training
- 3,830 hours
- Total
- 4,000 hours
- Hours or competency
- Competency-based: the hours are an industry guideline, and your sponsor signs off your skills as you master them.
- Status
- Inactive. No new registrations.
Where the in-school training happens
In-school levels are taught by training delivery agents the province approves, mostly colleges and some union training centres. Your sponsor and Skilled Trades Ontario will tell you where your level runs. Ontario does not publish one list by trade.
Sources: Skilled Trades Ontario: Tool and Gauge Inspector and Skilled Trades Ontario, Apprenticeship Programs Quick Facts Chart (updated June 2026). Check both before you register: programs and training availability change.
Get ready now
Start before you apply
What to learn and make while you are still in school, so you walk into an employer's shop with something to show.
Skills to start building
Make something to show
Build a first article inspection report using fictional part dimensions, marking each measurement as pass or fail.
Paper and screen only. Bring it to a job shadow or interview.
Who to talk to first
A quality lab or metrology supervisor, or a college program coordinator who can point to related machining routes.
In high school? Your OYAP recruiter can arrange placements once you are 15, in Grade 11 or 12, with at least 14 credits.
Where it can lead
Paths people take after they certify, with more experience or more training.
Ask an employer
Before you sign on, or on a job shadow day.
- Since this trade is closed to new apprentices, which program would you hire from?
- Which measuring instruments will I learn to use, and who trains me?
What it pays in Ontario
Job Bank has no occupation group that clearly matches this trade, so we show no pay figure rather than guess one. Ask employers and the training delivery agencies listed on the Skilled Trades Ontario trade page what apprentices earn.
Questions people ask
- Do you need a licence to work as a Tool and Gauge Inspector in Ontario?
- No. Tool and Gauge Inspector is a non-compulsory trade, so you can work in it without a certificate. The apprenticeship and the Certificate of Apprenticeship are still the recognized proof of your skills.
- How long is the Tool and Gauge Inspector apprenticeship?
- 4,000 hours in total: 3,830 on the job and 170 in school, over 1 level of in-school training.
- Is Tool and Gauge Inspector a Red Seal trade?
- Not in Ontario. Certification is provincial.
- What do you need to start?
- The minimum education to register is C of Q in related trade. You must be at least 16, be allowed to work in Canada, and have a sponsor, usually an employer, who agrees to train you.
More industrial trades
Related trades
- Draftsperson Tool and Die DesignYou make the technical drawings and computer models that show toolmakers how to build the tools, dies and moulds used in factories.614C · Non-compulsory
- Machine Tool Builder and IntegratorYou build precision machine parts and put together industrial machines, using drawings and metal cutting tools to make exact fits.430M · Non-compulsory
- Tool and Cutter GrinderTool and Cutter Grinders shape and sharpen the cutting tools used in machine shops. You set up grinding machines and check the results with precise measuring tools.602C · Non-compulsory
- Tool and Die MakerTool and Die Makers build and repair the specialized tools, dies and fixtures that factories use to make parts. You work from drawings and machine metal to very exact sizes.430A · Non-compulsory
- Tool/Tooling MakerYou make the precise tools, moulds and fixtures that factories use to build other products, working from detailed drawings.630T · Non-compulsory
- Cabinet MakerYou build, finish and install cabinets, furniture and woodwork for homes and businesses, working from drawings.438A · Non-compulsory
Not sure which trade fits?